The top 10 considerations for factors contributing to blood sample integrity and quality

laatst gewijzigd: | Sample integriteit - Terug naar overzicht

1. Meeting the patient

First impressions count. This brief opportunity should be used to take control of the blood collection procedure, by exuding calm. Attention should be paid to a clean and hygienic appearance to underline a professional attitude and assure the patient and encourage confidence about the upcoming procedure.

2. Identification of the patient

The patient must be correctly identified, either verbally, in written form or electronically via barcode scan. A case of mixed identity can lead to serious problems, especially in the case of a misdiagnosis and inappropriate treatment.

3. Thorough evaluation of veins

When a thorough vein assessment is carried out before the procedure, a decision can be made on the best possible vein, meaning for example good refill rate, avoidance of bifurcations and understanding which needle size and product type is most appropriate for the vein conditions.

4. Good hygiene practice

Hands should be washed or sanitized between patients and gloves should be worn during the procedure helps to ensure that there is no cross-contamination.

5. Tourniquet application

A sufficient amount of pressure is 40mmHg [1], to make veins more prominent without blocking any blood flow. Tourniquets should not be applied for longer than 1 minute [2].

6. Order of draw

Observing the CLSI GP412 recommended order of draw helps ensure sample integrity by preventing carryover of additives that may interfere with subsequent samples. Taking tubes in the wrong order could furthermore invalidate results altogether due to this risk of additive contamination.

7. Invert samples

When a sample tube is filled, the tube is fully inverted 5-10 times or 4-5 times if a sodium citrate tube. One inversion is turning upside down, then upright again.

8. Allow serum samples to clot

In a standard tube this will be at least 30 minutes, but there are some rapid clot tube versions on the market, containing fibrin to speed up the process.

9. Store tubes upright

This helps keep samples intact, preventing gel or blood drops becoming attached to the rubber stopper and promotes clotting.

10. Transport as soon as possible

To ensure samples are analyzed whilst in the best possible condition, transport to the laboratory as soon as possible, ensuring that the samples are not exposed to extremes of temperature.

[1] WHO guidelines on drawing blood: best practices in phlebotomy, 2010, ISBN 978 92 4 159922 1

[2] CLSI GP41, Collection of Diagnostic Venous Blood Specimens, 7th Edition, April 2017

Neem het zekere voor het onzekere

Ontvang alle relevante informatie over het onderwerp veiligheid tijdens bloedafname!

Vind de juiste contacpersoon/-adres voor het versturen van een aanvraag

* verplicht veld

Disclaimer

Deze productinformatie is uitsluitend bestemd voor professionals in de gezondheidszorg. Hulpmiddelen van Greiner Bio-One mogen uitsluitend worden gebruikt door goed opgeleide beroepsbeoefenaren in de gezondheidszorg in overeenstemming met de betreffende gebruiksaanwijzing (IFU). Voor een opsomming van indicaties, contra-indicaties, voorzorgsmaatregelen en waarschuwingen wordt verwezen naar de gebruiksaanwijzing die bij elk product wordt geleverd of kan worden gedownload van onze website www.gbo.com (Download Center). Neem voor meer informatie contact op met uw lokale Greiner Bio-One vertegenwoordiger of bezoek onze website.

Alle informatie wordt ondanks zorgvuldige verwerking zonder garantie verstrekt. Elke aansprakelijkheid, garantie of waarborg van Greiner Bio-One GmbH is uitgesloten. Alle rechten, fouten en wijzigingen zijn voorbehouden. Voor zover niet anders vermeld, bezit Greiner Bio-One GmbH alle auteursrechten en/of andere (gebruiks)rechten op deze documenten, in het bijzonder op tekens zoals de genoemde (woord-)merken en logo's. Elk gebruik, verveelvoudiging of ander gebruik van de rechten van Greiner Bio-One GmbH is uitdrukkelijk verboden.

Testimonials op deze blog geven individuele ervaringen weer over het gebruik van onze producten en/of diensten. De in deze publicatie geuite meningen zijn die van de geïnterviewde; zij zijn niet bedoeld om de meningen of standpunten van Greiner Bio-One.

Media owner and publisher: Greiner Bio-One GmbH, Bad Haller Str. 32, 4550 Kremsmünster

INSCHRIJVEN VOOR DE NIEUWSBRIEF OF INFORMATIE AANVRAGEN
Registreer nu, dan ontvangt u op regelmatige basis de laatste informatie over Greiner Bio-One.

We redirected you to your country page. To go back to the previous page, please click the button.

You are not viewing your country page. To switch to your country, please click the button.